Need Help!!

[Bman505]

I was cleaning my Keltec PF9 today and when I was putting it back together, I got it jammed some how. When I put the slide back on it, it started to go back fine and then it just stopped. I can't get it unstuck, it just won't move at all. I have cleaned this gun several times with never a problem. Here are a few pics. Any ideas??:confused:

http://www.concealcarrychat.com/gallery/data/500/medium/DSC04807.JPG
http://www.concealcarrychat.com/gallery/data/500/medium/DSC04808.JPG
http://www.concealcarrychat.com/gallery/data/500/medium/DSC04810.JPG
http://www.concealcarrychat.com/gallery/data/500/medium/DSC04812.JPG

[nmstang]

I don't have any experience with Keltec, but on all the guns I own the barrel stays forward while the slide moves back. Looks like the barrel is stuck in the slide and that could cause a serious jam. Have you tried to tap on the top of the barrel to get it to go down and forward?

[rtuck77]

maybe the spring is on backwards,I have a makarov and have picked up the spring wrong and put it on and it jammedd up something like that.I dont know if it has a spring on the barral like the makarov or not but its just an idea

[Bman505]

I called Keltec today and spoke with one of their techs, he said to pull back on the slide as hard as I could and even tap it with a rubber mallet till I could pull the pin out. Took me a little bit, but got it working again. Not sure why it happened but it sounds like it has happened to others before. He know exactly what I was talking about.

[MasterBlaster]

Now that's what I call a sticky situation!

[rtuck77]

glad you got it fixed you might want to do some inspecting and find out what caused the problem and maybe take it to a gunsmith (if you arent one) and get them to look at it so that it dont cause you touble when you dont need touble form it when you need it.

[Bman505]

Good thinking there rtuck77